SeaDoo Challenger 99

Grounds down by starter have been cleaned on right engine,so there is no spark at all?Where is Adventuer when you need him.Keep the faith Jimmy,I`ll do some thinking on this one and post back.

Yah, I am about to beat my head in on working and thinking what to do to this thing...


Please, someone has to have some insight on what to do...

Thanks
Jimmy

Based on the manual stating 38 psi +/- 12 psi I think you would be safer with the little longer springs that are reading 36 psi.

Well, thats the issue. The old spring is reading 36 psi. And the two new springs are ready 25 psi and 46 psi.

I installed the new 46 psi last night but carbs are still laying on the bench waiting to see what you guys say about this before I bolt them up and adjust them. Would there be any issues running close to the max psi?

Does anyone know how many yards to do the entire job for 1999 Challenger 1800 would take? (3 bow seats, backrest for bow, two cap. seats, back bench seat, backrest for bench seat, sun deck, sun deck trim piece, arm rest for both sides, and the side pieces beside the back bench seat)

Also, my boat is green and white vinyl. I have thought about doing it all back white vinyl with green stiching and possibly marine piping that my grandmother showed me. She used do alot RVs and Boats back in the day. Does anyone have any experience or comments with it being all white?!?!? I know it will be a lot cooler than that green vinyl... ouch!

Thanks
Jimmy

And any rec. on air stapler. I have looked a little bit but didnt know if theres certain one I should look for or size... and what size staples should i use?