Find content
Not Telling
The port RPM gage is not working on my 1996 Seadoo Speedster twin engine. It is not the gage but at the sender. I do not know where the sender is located on the engine. I have adjusted the cables and the hard pull to port is no problem now. Help, JackHow's the RPM's? When the boat is pulling are the RPM the same. I have to tweak my throttle a bit to get both engines running at the same rpm. I suppose I could make some adjustments on the throttle cable to minimize this. If it isn't the throttle cables then I'd take a good look at the props. I'd only doo this after checking all the nuts and bolts in the steering. Lost a bolt on one of the steering cone once. It wasn't difficult to fix, but it ended my day early since I didn't carry a replacement bolt.
