Has anyone tried different impellers yet and does anyone know what the pitch of the stock impellers are? Also has anyone installed the 2 degree pump wedges to try and get the hull out of the water a little more.

Impellers/wedges for Speedster 200
Started by jmhanep, Mar 28 2005 06:34 AM
2 replies to this topic
#1
Posted 28 March 2005 - 06:34 AM
#2
Posted 28 March 2005 - 06:52 AM
There has been some discussion about the pump wedges here, http://seadoosportbo...wtopic_607.html.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
Posted 28 March 2005 - 12:05 PM
The 2 degree wedges would probably be the best angle if tried. I did install some wedges last season, that were made by a member here, but unfortunately never tried them out. There was not enough material in the wedge to keep the "ear" on the pump housing from pulling toward the nozzle (and breaking off) when tightening the bolts. 2 degrees is alot when you look at the angle of the nozzle after installation.Has anyone tried different impellers yet and does anyone know what the pitch of the stock impellers are? Also has anyone installed the 2 degree pump wedges to try and get the hull out of the water a little more.
1997 Seadoo XP 800 (sorry, at least it is a DOO!!!)
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users