210 / 230 Challenger Bow Filler Cushion
Posted 09 May 2012 - 08:25 PM
Throughout the fall and winter I was checking the BRP parts catalog online to find the part number so I could order the cushion. In Feb or Mar I finally found it in the accessory catalog (PAC) but the picture was of a 180. I took a chance and ordered it hoping it would fit. I have the tan or taupe accented interior with the SE, but the catalog listed parts for the SP and Wake models that should match the orange and red respectively.
The cushion showed up 2 weeks ago (it was back-ordered) and turns out it fit my 2010! There were a couple of surprises. The first surprise was that the bow cushion included a back rest. I had no idea this was part of the package. The second surprise was that some assembly was required. The cushion itself was two pieces and a hinge was provided to attach the two together. There was also an elastic loop to attach to the cushion and a plastic hook to attach to the boat. The hook and loop holds the cushion in place.
A couple of thoughts. The back rest is a little klunky to put into position. I don't know if this specific to my boat or the backrest I received, but there is a slight alignment issue that I might need to fix. The other thing is that I had to drill some additional holes to install the hinge. The pre-drills from the factory and how the upholstery was attached did not allow the hinge to line up correctly.
We took the boat out this past weekend and I was able to get some pictures. I also attached the instructions that came with it. The instructions also included the 230 so there are some good pictures of that setup as well. I haven't been able to find any information anywhere on the web so hopefully this helps somebody out.
210_challenger_bow_filler_instructions.pdf 2.87MB 110 downloads
IMG_0141.JPG 73.63KB 113 downloads IMG_0144.JPG 68.96KB 122 downloads IMG_0149.JPG 54.82KB 104 downloads IMG_0151.JPG 85.48KB 93 downloads
IMG_0152.JPG 152.26KB 91 downloads IMG_0155.JPG 136.86KB 70 downloads
- Kevin Leclair and LareeOwnefs like this
Posted 11 May 2012 - 06:57 PM
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Posted 14 May 2012 - 12:06 PM
Posted 07 June 2012 - 12:14 PM
Thank you for the info.
FYI to other, the Part Numbers on on the PDF that GVera posted.
Posted 21 June 2012 - 06:11 PM
Posted 07 June 2013 - 04:18 PM
Well thanks to your post im now $499.00 poorer . But my wife will love the bow fill cushions in my 2010 wake 210. I will grab some photos on the weekend.
Again thanks for the post I did not know they made them till I seen your post.
2010 Sea-Doo Wake 210 310hp & 1997 Sea-Doo GTX
Posted 21 May 2014 - 01:35 PM
i cant find them for the 180
Posted 21 May 2014 - 07:19 PM
Found this on ebay by searching for part number 269002546. Is this what your looking for?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users