loading 2010 sea doo 180 challenger
#1
Posted 23 April 2012 - 08:49 PM
#2
Posted 24 April 2012 - 08:14 AM
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
Posted 24 April 2012 - 05:17 PM
nice boat by the way i first looked at the 21 footer but when i met it in person i realized i would have to start a little smaller.
any way thanks again ill let you know how i make out
Dale
#4
Posted 24 April 2012 - 06:49 PM
#5
Posted 11 May 2012 - 10:43 PM
thanks moochy i will keep that in mindHi dale, I have the same boat, you will find that if your too deep in on a medium to steep ramp the blue roller on the trailer will be too high and roll down the fiberglass until youve wound to proper resting point. To avoid damage I have a piece of marine carpet about 30cm square that I wedge infront of the roller as I'm winding on. I keep it there until the next trip to avoid rubbing whilst in transit.
#6
Posted 27 May 2012 - 11:24 PM
thanks Dale
#7
Posted 28 May 2012 - 05:30 PM
I have the 2010 180 challenger with the 255hp engine. As far as fuel mileage goes, when crusing at 30mph @ 6000 rpms, I can get at least 3.5 hrs of driving. Therefore, approx. 100 mile range.
If you travel over or under 30mph your fuel consumption increases dramatically.
As for the beeps, the only time I have gotten the 4 beeps is when I have left the key in when the engine is off. It starts about 10 mins after you shut down the engine telling you the power is still on. I think if you dont have any codes displayed there shouldnt be a problem.
P.S. Its hard keeping the boat at 30mph, you just cant help opening it up once in a while.
#8
Posted 30 May 2012 - 07:55 PM
thanks again Dale
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users