2 replies to this topic

[MartinD]

My lovely plastic ignition switch (3 way?) on my 2004 Utopia 205 (250) is very squirrely. I'm having a hard time keeping it from turning when starting the engine.

I was planning on replacing the plastic one with a metal 3 way switch, so I can tighten it down properly, from West Marine but after looking at the replacement parts available for my boat, it seems there is only an ignition assembly for over $300.

Can i replace with a $40 ignition switch, gorilla glue the whole thing so it doesn't turn any more or buy the assembly?

Thanks in advance!

Martin

[Kevin Leclair]

Martin,

I would try the "gorilla glue" option first. If that does not work then try the more expense option. Keep us posted.

Welcome to the site too.

[MartinD]

Thanks for the response. Will give it a try and update in a week.