My lovely plastic ignition switch (3 way?) on my 2004 Utopia 205 (250) is very squirrely. I'm having a hard time keeping it from turning when starting the engine.
I was planning on replacing the plastic one with a metal 3 way switch, so I can tighten it down properly, from West Marine but after looking at the replacement parts available for my boat, it seems there is only an ignition assembly for over $300.
Can i replace with a $40 ignition switch, gorilla glue the whole thing so it doesn't turn any more or buy the assembly?
Thanks in advance!
Martin
2004 205 Ignition Switch replacement possible?
Started by
MartinD
, Jun 01 2011 04:09 PM
2 replies to this topic
#1
Posted 01 June 2011 - 04:09 PM
Martin
--2004 Utopia 205--
--2004 Utopia 205--
#2
Posted 02 June 2011 - 07:41 AM
Martin,
I would try the "gorilla glue" option first. If that does not work then try the more expense option. Keep us posted.
Welcome to the site too.
I would try the "gorilla glue" option first. If that does not work then try the more expense option. Keep us posted.
Welcome to the site too.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
Posted 02 June 2011 - 01:26 PM
Thanks for the response. Will give it a try and update in a week.
Martin
--2004 Utopia 205--
--2004 Utopia 205--
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users