I need to run a transducer cable from the drivers console to the engine compartment on my 2001 Utopia. Can anyone tell me how it routes under the floor or down the side wall.

How to run a transducer cable on 2001 Utopia
Started by Patton43, Apr 26 2011 09:48 PM
4 replies to this topic
#1
Posted 26 April 2011 - 09:48 PM
#2
Posted 27 April 2011 - 07:21 AM
I ran a cable in my challenger from the stereo. To the battery, I used a thick tape measure to route it down the side wall. Im not sure where your speakers are at but I removed the speaker so I could see and there was a rubber flap right there I assume to reduce engine noise, pulled that back and the wire went right through
#3
Posted 27 April 2011 - 12:29 PM
I ran a cable in my challenger from the stereo. To the battery, I used a thick tape measure to route it down the side wall. Im not sure where your speakers are at but I removed the speaker so I could see and there was a rubber flap right there I assume to reduce engine noise, pulled that back and the wire went right through
Cool, I never thought of a tape measure I will give that a shot. Thanks for the help
#4
Posted 27 April 2011 - 12:44 PM
No problem, is easiest to run the tape measure thru first the tape the cable to it and pull it back.
#5
Posted 21 May 2011 - 12:25 PM
The tape measure worked great thanks for the advise.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users