5 replies to this topic

[kpracing12]

Hi
Anyone help on this one
The hatch / esky / cooler on the passenger side of the speedster doesn't drain
Any ideas on where it drains to.
You shoot a hose down the hole and the water comes back up and fills it up again
Thanks
Pete

[Kevin Leclair]

Pete, in our 180 it seemed to drain to our engine bay so it could be pumped out by the bilge pump if needed. Have you tried using something to snake down the hole of the drain to see if something has it clogged? At times we had pieces of foam that would clog ours up. Keep us posted.

[kpracing12]

Thanks Kevin
All fixed
The foam under the pocket has come loose and moved.
Pushed a long screwdriver down the drain hole and through the foam.
Drains into the centre storage well then out through the back
All good now.

[kpracing12]

Kevin
How hard should the reverse bucket be to move up and down with the cable disconnected.
The foward / neutral / reverde lever requires a forceful movement to operate it.
If I take the shift cable off the bucket , the bucket can be moved up and down by hand but has a fair bit of resistance.
Thanks Pete

[Kevin Leclair]

Thanks Kevin
All fixed
The foam under the pocket has come loose and moved.
Pushed a long screwdriver down the drain hole and through the foam.
Drains into the centre storage well then out through the back
All good now.

Great to hear, glad you got this resolved!

[Kevin Leclair]

Kevin
How hard should the reverse bucket be to move up and down with the cable disconnected.
The foward / neutral / reverde lever requires a forceful movement to operate it.
If I take the shift cable off the bucket , the bucket can be moved up and down by hand but has a fair bit of resistance.
Thanks Pete

Pete to be honest I have never tried moving the reverse bucket without the cable connected so I can't say how difficult it should be to move up and down.