Man, went to the lake this weekend to take out the boat for the 1st time this year and needed to put the battery back in. Well, needless to say, didn't get to take the boat out. Tiggerman I know you know how to do this. Help me out! Thanks!
4 replies to this topic
#2
pokefan
-
- Members
-
- 13 posts
Novice
Posted 24 May 2004 - 04:14 PM
I have the same boat as yours tiggerman. Sorry.Man, went to the lake this weekend to take out the boat for the 1st time this year and needed to put the battery back in. Well, needless to say, didn't get to take the boat out. Tiggerman I know you know how to do this. Help me out! Thanks!
#3
tiggerman
-
- +SDSB Club
-
- 1,356 posts
SeaDooSportBoats.com Sport Boat Specialist
Posted 24 May 2004 - 05:00 PM
Here ya go:
The cone part of the tuned pipe has to come out. Loosen the big clamp on the big part of the tuned pipe, and loosen both clamps on the small end. Take the rubber strap off the waterbox (muffler) so it can move a bit. Twist the cone around until it pops out of the tuned pipe and the waterbox. Take the strap loose on the battery, and so on and so forth. It is still going to be a tight fit to slide the battery thru the opening you just made. Here is a pic of the piece you are taking out. The cone is the purple part with the small rubber hose connected to it. It's big on one end and little on the other. Good luck!
The cone part of the tuned pipe has to come out. Loosen the big clamp on the big part of the tuned pipe, and loosen both clamps on the small end. Take the rubber strap off the waterbox (muffler) so it can move a bit. Twist the cone around until it pops out of the tuned pipe and the waterbox. Take the strap loose on the battery, and so on and so forth. It is still going to be a tight fit to slide the battery thru the opening you just made. Here is a pic of the piece you are taking out. The cone is the purple part with the small rubber hose connected to it. It's big on one end and little on the other. Good luck!
Attached Files
-
DSC00283.JPG 154.85KB
29 downloads
1997 Seadoo XP 800 (sorry, at least it is a DOO!!!)
#4
pokefan
-
- Members
-
- 13 posts
Novice
Posted 01 June 2004 - 09:39 AM
Thanks!Here ya go:
The cone part of the tuned pipe has to come out. Loosen the big clamp on the big part of the tuned pipe, and loosen both clamps on the small end. Take the rubber strap off the waterbox (muffler) so it can move a bit. Twist the cone around until it pops out of the tuned pipe and the waterbox. Take the strap loose on the battery, and so on and so forth. It is still going to be a tight fit to slide the battery thru the opening you just made. Here is a pic of the piece you are taking out. The cone is the purple part with the small rubber hose connected to it. It's big on one end and little on the other. Good luck!
#5
tiggerman
-
- +SDSB Club
-
- 1,356 posts
SeaDooSportBoats.com Sport Boat Specialist
Posted 01 June 2004 - 09:56 AM
When you take it out, you may need to tilt it just a bit. Not too much, or you may spill electrolyte (unless its a AGM).
1997 Seadoo XP 800 (sorry, at least it is a DOO!!!)
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
