1 reply to this topic

[kathygrace]

where does one connect the two leads from a hand held remote starter switch, so I CAN turn over the engine with using the key/starter on the dash, so i can test engine compressioon without having the EFI feed fuel? already have all the spark plugs wires unplugged and just one plug out

[gofast]

follow your large red wire from the starter .It will go to one post of a large relay with two posts . the wire on other post will go to Batt POS . There will be a small gauge wire also , this is where you hook up one wire from remote starter . the other remote starter wire 0goes to the post going to the batt pos. when u push the button you will apply power to engage stater