Scupper intake filter
Posted 22 May 2010 - 12:50 PM
Posted 23 May 2010 - 07:28 AM
Posted 23 May 2010 - 12:31 PM
I'll see what I can do today, as the party's tomorrow.
Posted 09 June 2010 - 01:09 AM
Get a piece of "hardware cloth", which is just metal screen material. You should be able to get it at your hardware store, and for $5 you'll have way more than you need. Then pick up waterproof silicon glue.
Wipe off the scupper intake and be prepared to towel away any excess water. (hardest part)
Cut the piece of mesh to fit onto the intake hole.
While keeping the scupper intake dry, apply the silicon glue to the face of the intake hole. Press the cut mesh into the glue. Apply another layer of glue over the screen (this prevents you from getting cut on the mesh). Should take about 3 hours to dry.
Hose out the boat, and just clean up the junk that accumulates on the screen as needed.
Posted 28 June 2011 - 05:14 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users