32 replies to this topic

[tiggerman]

Uh huh......I just keep diggin' myself deeper over here... I'll put my foot down.
Just as soon as I get permission.

[Kevin Leclair]

Sounds like a plan!

[Kevin Leclair]

Yeah, Laurel has been out of town. I will give Hydro-Turf a call tomorrow and see when she is due to be back in town.

John,

I just spoke with Laurel at Hydro-Turf; she is back in the office. She said to give her a call tomorrow because she is playing catch-up today. I told her about your interest in Hydro-Turf for the Sugar Sand line-up, she said they didn't really have a demand for this boat yet so I told her it would be best if you just discussed this with her since you are the owner of the boat. She said there is a tooling fee that is pretty steep for them to cut a new pattern so she said she would probably need at least 5 orders before she could do it and she would still have to talk it over to get it approved by her boss. Just give her a call tomorrow to see what you guys can work out, let me know if I can be of any assistance.

[stevenh]

Uh huh......I just keep diggin' myself deeper over here... I'll put my foot down.
Just as soon as I get permission.

I guess I am just lucky, it was my wife's idea to upgrade from the Sporster 4-tec ('03) to the Speedster 200 ('05). We all wanted more room, but she made me buy it! Now for that snow to melt...

Steve

[tiggerman]

Uh huh......I just keep diggin' myself deeper over here... I'll put my foot down.
Just as soon as I get permission.

I guess I am just lucky, it was my wife's idea to upgrade from the Sporster 4-tec ('03) to the Speedster 200 ('05). We all wanted more room, but she made me buy it! Now for that snow to melt...

Steve

Yeah, it was my wifes idea to run out and buy me a new truck...... we came back from the dealer with a new car.. FOR HER.... life's tough.... Im gonna go ahead and add the turf to the '97. Give it a little resale boost.

[Kevin Leclair]

Yeah, Laurel has been out of town.  I will give Hydro-Turf a call tomorrow and see when she is due to be back in town.

John,

I just spoke with Laurel at Hydro-Turf; she is back in the office. She said to give her a call tomorrow because she is playing catch-up today. I told her about your interest in Hydro-Turf for the Sugar Sand line-up, she said they didn't really have a demand for this boat yet so I told her it would be best if you just discussed this with her since you are the owner of the boat. She said there is a tooling fee that is pretty steep for them to cut a new pattern so she said she would probably need at least 5 orders before she could do it and she would still have to talk it over to get it approved by her boss. Just give her a call tomorrow to see what you guys can work out, let me know if I can be of any assistance.

John,

Any luck getting turf for your Sugar Sand?

[stevenh]

Uh huh......I just keep diggin' myself deeper over here... I'll put my foot down.
Just as soon as I get permission.

I guess I am just lucky, it was my wife's idea to upgrade from the Sporster 4-tec ('03) to the Speedster 200 ('05). We all wanted more room, but she made me buy it! Now for that snow to melt...

Steve

Yeah, it was my wifes idea to run out and buy me a new truck...... we came back from the dealer with a new car.. FOR HER.... life's tough.... Im gonna go ahead and add the turf to the '97. Give it a little resale boost.

Triggerman,

I miss my '97 Speedster, that is one great handling boat! I miss those spins!

Steve

[tiggerman]

It does handle nicely....... OK, I'll swap ya........

[jmhanep]

I worked with Arno at Hydro-turf and supplied him a pattern for the 200.  He produced it and I have installed it.  Installation was a snap with the pre applied adhesive (highly recommended) and it looks great. For more info contact Arno at Hydro-turf :Pictures attached

I wanted to try this HydroTurf out by my concern was shrinking or any other issue that might cause one to remove it. if it is ever removed...for any reason, will it leave behind tons of glue residue?

What colors do they have for the 200sc?

Tim D

If you buy the pre applied 3M you do not have to ruff up the gell coate where you apply the hydro-turf so if you ever want to remove it you can. It is a $100 option but the glue alone would cost $75 and it cuts the installation time by 2/3. All hydro-turf colors are available look at their web site for choices.

Good Luck
Mike

[Kevin Leclair]

Color samples:
http://www.hydroturf...c_matcolors.php

[badass]

I worked with Arno at Hydro-turf and supplied him a pattern for the 200. He produced it and I have installed it. Installation was a snap with the pre applied adhesive (highly recommended) and it looks great. For more info contact Arno at Hydro-turf :Pictures attached

Loooks great where can i get that hydro turf & how much $. can i get it pre cut for my boat? ( speedster 200 ) are there any other colors? Ps i noticed you have a Biminie on yours is that factory or aftermarket & does it stay down when running or is it bouncing around? i have same color boat. ps where are you locate?