I tried to connect an older IPOD & a newer IPOD Touch through the USB connection in the storage compartment. Neither would work. I got them connected using the headphone jack. The head unit is the factory Jensen that came with the boat. Any one else have this problem?
6 replies to this topic
#1
Weisfive
-
- Members
-
- 12 posts
Novice
- Year of DOO:2011
- Model of DOO:210 SP
- Engine in DOO:Twin Rotax 4-TEC 1503
Posted 05 June 2012 - 06:06 PM
#2
Kevin Leclair
-
- SDSB Management
-
- 5,389 posts
SeaDooSportBoats.com Founder
- Water:Allatoona Lake
- Year of DOO:2010
- Model of DOO:210 Wake
- Engine in DOO:Twin Rotax 4-TEC SCIC
Posted 06 June 2012 - 07:34 AM
Ours works, so I wonder if you have a loose connection.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
Weisfive
-
- Members
-
- 12 posts
Novice
- Year of DOO:2011
- Model of DOO:210 SP
- Engine in DOO:Twin Rotax 4-TEC 1503
Posted 06 June 2012 - 10:24 AM
Its at the dealer right now for another issue. Chk Starboard Engine code flashing between 5000-6000 rpm???
More concerned about that right now. I was told it could be setting of the knock sensor in the mid-range.
Started first trip out this year. Ran fine all last season. Told them to look @ the stereo while its there.
More concerned about that right now. I was told it could be setting of the knock sensor in the mid-range.
Started first trip out this year. Ran fine all last season. Told them to look @ the stereo while its there.
#4
Weisfive
-
- Members
-
- 12 posts
Novice
- Year of DOO:2011
- Model of DOO:210 SP
- Engine in DOO:Twin Rotax 4-TEC 1503
Posted 15 June 2012 - 09:59 PM
Knock Sensor faulty. Just got boat back home. Waiting to get back out to see if it's fixed.
Jensen said USB port only works with Flash Drive; not IPOD's.
Who doesn't have an Ipod/IPhone! Come on Jensen: Get with the times!
Jensen said USB port only works with Flash Drive; not IPOD's.
Who doesn't have an Ipod/IPhone! Come on Jensen: Get with the times!
#5
Stef
-
- Members
-
- 21 posts
Novice
- Water:Lac des Sables
- Year of DOO:2011
- Model of DOO:210 SP
- Engine in DOO:Twin Rotax 4-TEC 1503
Posted 25 June 2012 - 01:51 PM
Correct, got to use the audio aux input for Ipod music....
Stef
#7
gverva
-
- Members
-
- 27 posts
Novice
- Year of DOO:2010
- Model of DOO:Challenger 210 SE
- Engine in DOO:Twin Rotax 4-TEC 1503
Posted 27 June 2012 - 09:24 AM
The factory Jensen radio (MSR2107) is capable of controlling an ipod but only older models and only 1st gen iphone unfortunately. There is a ipod connection on the amplifier located behind the helm (accessed from starboard bow behind black curtain). You need to purchase a special cable to plug in there and the other end connects to your ipod. I think the real bummer is that is incompatible with recent iphones.
Here's a link to the ipod compatibliity guide from Jensen: http://www.jensenrvd...ility_guide.pdf
Here's a link to the ipod compatibliity guide from Jensen: http://www.jensenrvd...ility_guide.pdf
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
