Hello, I just regestered and may have made a mistake doing so on the model boat I have. Sorry!
I have a 2001 sporster LE with the 947 rotax motor. I am trying to winterize it and I get antifreeze pooring out as fast as I can put it in. It is coming out on the low side of the jet drive out side the boat. I did this last year after clamping a hose, I can not remember what one! and then I attached a short section of garden hose screwed in to the fitting in the same area on the jet drive and routed it up so the antifreeze would fill into the entire motor and I let it set for several hours, making sure the entire motor was filled. Does any one have a picture of the correct hose to pinch off? Thank you for any suggestions. Rick
7 replies to this topic
#1
rickmcd
-
- Members
-
- 5 posts
Novice
- Water:in-land lakes
- Year of DOO:2001
- Model of DOO:Sportster LE DI
- Engine in DOO:947 Rotax
Posted 20 September 2011 - 04:17 PM
#2
Kevin Leclair
-
- SDSB Management
-
- 5,389 posts
SeaDooSportBoats.com Founder
- Water:Allatoona Lake
- Year of DOO:2010
- Model of DOO:210 Wake
- Engine in DOO:Twin Rotax 4-TEC SCIC
Posted 20 September 2011 - 06:50 PM
Welcome.
I do not have any pictures, but use this as a guide, http://seadoosportbo...nterizing_Rotax.
Keep us posted.
I do not have any pictures, but use this as a guide, http://seadoosportbo...nterizing_Rotax.
Keep us posted.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
rickmcd
-
- Members
-
- 5 posts
Novice
- Water:in-land lakes
- Year of DOO:2001
- Model of DOO:Sportster LE DI
- Engine in DOO:947 Rotax
Posted 21 September 2011 - 09:32 AM
Welcome.
I do not have any pictures, but use this as a guide, http://seadoosportbo...nterizing_Rotax.
Keep us posted.
#4
rickmcd
-
- Members
-
- 5 posts
Novice
- Water:in-land lakes
- Year of DOO:2001
- Model of DOO:Sportster LE DI
- Engine in DOO:947 Rotax
Posted 21 September 2011 - 09:37 AM
Thank you Kevin, that is a big help. I am 68 years old and I had trouble bending over into the boat
while installing the dran hose clamp. I think this is why the antifreeze ran out. I will clamp it again
using your suggestions. I will let you know if I have better luck. Can you suggest the best manual
for this 2001 sportster LE with 947 Rotax motor?
while installing the dran hose clamp. I think this is why the antifreeze ran out. I will clamp it again
using your suggestions. I will let you know if I have better luck. Can you suggest the best manual
for this 2001 sportster LE with 947 Rotax motor?
#5
Kevin Leclair
-
- SDSB Management
-
- 5,389 posts
SeaDooSportBoats.com Founder
- Water:Allatoona Lake
- Year of DOO:2010
- Model of DOO:210 Wake
- Engine in DOO:Twin Rotax 4-TEC SCIC
Posted 21 September 2011 - 10:48 AM
You're welcome Rick.
We do not have a specific manual available for the 2001, but you can browse our shop manuals to see what is available - http://seadoosportbo...t-boat-manuals/. I believe the closest we have is for a 1999, http://seadoosportbo...00-shop-manual/
We do not have a specific manual available for the 2001, but you can browse our shop manuals to see what is available - http://seadoosportbo...t-boat-manuals/. I believe the closest we have is for a 1999, http://seadoosportbo...00-shop-manual/
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#6
marty319
-
- Members
-
- 4 posts
Novice
- Water:lake winnipeg
- Year of DOO:2004
- Model of DOO:Speedster
- Engine in DOO:947 Rotax
Posted 21 September 2011 - 01:03 PM
i`m wondering if you couldn`t use a utility pump and pump straight anti freeze through the back flushing connecter?
#7
rickmcd
-
- Members
-
- 5 posts
Novice
- Water:in-land lakes
- Year of DOO:2001
- Model of DOO:Sportster LE DI
- Engine in DOO:947 Rotax
Posted 21 September 2011 - 02:04 PM
i`m wondering if you couldn`t use a utility pump and pump straight anti freeze through the back flushing connecter?
#8
rickmcd
-
- Members
-
- 5 posts
Novice
- Water:in-land lakes
- Year of DOO:2001
- Model of DOO:Sportster LE DI
- Engine in DOO:947 Rotax
Posted 21 September 2011 - 02:17 PM
Thank you Marty and Kevin. I found some better hose clamps at a wood working tool supply near by.
The clamps have a round bar on one end and the regular "C" clamp screw end on the other. Anyway
my problem was the old small "C" clamps I was using. I have now filled the motor with Antifreeze and it is holding. (no leaking) I know the motor is full as I put in more than a 1/2 gallon and it now has antifreeze in the fill hose funnel that is still in the cylinder head. I will check out manuals for this boat on line as you suggested.
Thanks again Rick
The clamps have a round bar on one end and the regular "C" clamp screw end on the other. Anyway
my problem was the old small "C" clamps I was using. I have now filled the motor with Antifreeze and it is holding. (no leaking) I know the motor is full as I put in more than a 1/2 gallon and it now has antifreeze in the fill hose funnel that is still in the cylinder head. I will check out manuals for this boat on line as you suggested.
Thanks again Rick
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
