210 SP fit in a standard garage?
#1
Posted 04 August 2011 - 08:28 AM
We live about a mile from the boat launch we expect to use most of the time, so our plan was to have the boat in the garage ready whenever weather and work allowed. Not having to take a cover off an on every time will definately make it a bit more inviting to hop on the water.
However, we have a standard height garage door (7' high clearance).
Are we out of luck getting a 210SP in the garage?
We didn't consider looking at it with the tower down at the dealer - but from the photos we've seen on line, it certainly didn't appear that when folded it took up another 2' above the windshield.
Thanks for feedback/info ahead of time.
#2
Posted 04 August 2011 - 08:58 AM
Fitting into your garage would make everything much easier for you.
PS- I love my 210 SP.
#3
Posted 04 August 2011 - 09:13 AM
Because of the new tower design it was one of the deciding factors of why we chose to go with a 2010 rather than the 2011, the older tower folds towards the transom instead of towards the windshield allowing us to fit it in our standard garage.
I spoke with BRP about this when they launched the new tower design as it was a huge concern for us, but as you stated the specs state 8' so the way we read it, it will not fit.
I will say I have not actually tried since we do not have a boat with the newer tower that we can try to squeeze into our garage. When purchasing a boat at this cost it was not a risk we were willing to take so we chose the 2010 model to be sure.
It definitely would of been nice to have the newer tower because it is much easier to collapse but it does not seem practical for those of use wanting to store it in a standard garage still.
Keep us posted if you give it a try, as I am really interested to know if it will clear.
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#4
Posted 04 August 2011 - 09:35 AM
with the tower down, I think it is about 2' above the windshield. It is lower when you do not use the brackets that hold the tower in the folded position.
Fitting into your garage would make everything much easier for you.
PS- I love my 210 SP.
Do you have pics of the brackets you mention? I regret not playing with this at the dealer!
#5
Posted 04 August 2011 - 10:01 AM
I found this image in the gallery. In this pic, it doesn't appear that the tower takes up 2' of space above the windshield.
By chance - do you recall when you took this if it appeared to be 2'above the windshield?
http://seadoosportbo...-tower-downjpg/
#6
Posted 04 August 2011 - 10:53 AM
#7
Posted 04 August 2011 - 11:06 AM
One thing to watch out for when measuring it for the garage is to take into consideration the length of the boat that will be hanging over the trailer. I didn't. I went strictly by the length of the trailer with folded tongue. So to account for the extra length, I have to put the boat in the garage at a slight angle, rather than straight in. With the longer boat, I would imagine there is more hang-over.
Hmmm, good thing to consider. I was understanding the "length on trailer with folded tongue" dimension accounted for this.
#8
Posted 04 August 2011 - 11:13 AM
Seeing that the 210SE is spec'd at 6'11 on the trailer - I guess it would make sense that with the current tower design, folded it wouldn't fit through a 7' door.
Bummer.
Having it in the garage was really ideal. Although we have a wider driveway, it's not a full 3 cars wide -so leaving it in the driveway is not a realistic option for convenience - either for parking other vehicles in the driveway, or for keeping the boat and contents protected and secure.
I guess we'll need to reconsider the SE model.
#9
Posted 04 August 2011 - 12:47 PM
I do not believe it was a full 2' but it was close, probably more like a 1' 6".Kevin -
I found this image in the gallery. In this pic, it doesn't appear that the tower takes up 2' of space above the windshield.
By chance - do you recall when you took this if it appeared to be 2'above the windshield?
http://seadoosportbo...-tower-downjpg/
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#10
Posted 04 August 2011 - 10:35 PM
Do you have pics of the brackets you mention? I regret not playing with this at the dealer!
It is a bracket that attaches to the stern side of the tower and prevents the tower from touching the windshield. Without them, the tower will sit on the windshield resulting in a lower clearance of a couple of inches.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users