so one of my xp's was surging on the last ride last summer. i took it to a shop and they called yesterday and told me they were gonna clean the screens in the carbs,re-set the pop off and it looks like it needs some lines replaced and would take it to the water and test it. all for $600! i told them to clean the screens and re-set the pop off and i would take it and test it. all for 350 to $400! is cleaning the carb screens a 4 or 5 hr. job? i hope that fixes the problem.
my 96 xp
Started by redhousexp, May 17 2011 11:52 AM
7 replies to this topic
#1
Posted 17 May 2011 - 11:52 AM
#2
Posted 17 May 2011 - 12:08 PM
I would say it all depends on the technician doing the job on how long it should take. I would recommend calling a couple of other dealers just to get a labor quote and then go from there. Keep us posted.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
Posted 17 May 2011 - 05:01 PM
do most repair shops have tank that they can test run the pwc's in after repairs? maybe i could build them one. hmmmmmmmmmmm
#4
Posted 17 May 2011 - 05:53 PM
Our repair shop does.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#5
Posted 18 May 2011 - 09:48 AM
gonna pick up my doo today and weather permitting i will take it out and run it and see if they fixed it. i still gotta get a new start/stop button. i cut the button off and touch the wires together to start it.
#6
Posted 18 May 2011 - 01:29 PM
picked up the doo and put the steering console back together. charged the battery and fired it up. i got no "chirp" when i plugged in the "key".but that happens sometimes.sometimes it chirps sometimes it dont . gonna take it out to the water and see if they fixed the surging problem. they said the screens in the carbs were really plugged so ill see what happens.
#7
Posted 18 May 2011 - 06:34 PM
ran great! now i gotta get the battery light prob fixed. will i hurt anything by running it with the battery light on? other than my battery will go dead eventually. also since the vts doesnt work on either ski i took one of the switches and spliced the wires and put it in the starter button hole! works great! now i have a beige starter button instead of red. oh well
#8
Posted 18 May 2011 - 07:32 PM
Great news, I don't believe it will hurt to run with the battery light on.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users