Wow!, Never thought it would be this quick or fun to drive. Merc 240 w/ electric trim option. Runs smooth even in the chop. Anyone have a Bimini Top they want to part with? Speedo not running right now.. any ideas? Boat was barely used... Less than 20 hours on it. Stored in a climate controlled storage center and washed and waxed after every use. First real test ride this morning at 10am. 37 degrees and sunny. NO sub moves today!!! I'll wait on that till summer returns!
8 replies to this topic
#1
Speedster601
-
- Members
-
- 2 posts
Novice
- Water:Lake LBJ
- Year of DOO:2004
- Model of DOO:Speedster 160
- Engine in DOO:Mercury Mē Jet Drive 240 EFI
Posted 26 December 2010 - 06:17 PM
#2
Speedster601
-
- Members
-
- 2 posts
Novice
- Water:Lake LBJ
- Year of DOO:2004
- Model of DOO:Speedster 160
- Engine in DOO:Mercury Mē Jet Drive 240 EFI
Posted 26 December 2010 - 06:28 PM
Wow!, Never thought it would be this quick or fun to drive. Merc 240 w/ electric trim option. Runs smooth even in the chop. Anyone have a Bimini Top they want to part with? Speedo not running right now.. any ideas? Boat was barely used... Less than 20 hours on it. Stored in a climate controlled storage center and washed and waxed after every use. First real test ride this morning at 10am. 37 degrees and sunny. NO sub moves today!!! I'll wait on that till summer returns!
Will someone please emai me a operators manual? PLEASE!!
#3
Kevin Leclair
-
- SDSB Management
-
- 5,389 posts
SeaDooSportBoats.com Founder
- Water:Allatoona Lake
- Year of DOO:2010
- Model of DOO:210 Wake
- Engine in DOO:Twin Rotax 4-TEC SCIC
Posted 26 December 2010 - 09:07 PM
You should be able to download the operator's manual directly from SeaDoo, http://www.operators...l=/default.aspx
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#4
Ron K
-
- Members
-
- 16 posts
Novice
- Water:Fennessy Lake and Lake Michigan
- Year of DOO:2001
- Model of DOO:Speedster 160
- Engine in DOO:Mercury Mē Jet Drive 240 EFI
Posted 25 February 2011 - 08:41 AM
I just got a 2001 (what did you have to pay for yours can I ask?)
I bought one - but won't pick it up until ice thaws and we can water test it for final sale.
I ordered bimini thought Overton's. Around 250 and they have 50 off 250 this week.
It may not lay back over the curved areas of the boat rails. but I'll just remove it and leave it on my dock when not using it. I think it will be up most the time as I'm not much of a direct sun person. I won't know how well a bimini would hold up at full speed, but I don't forsee 60+ for long periods very often either. Check them out - I ordered the 85-90" size. (wide)
I bought one - but won't pick it up until ice thaws and we can water test it for final sale.
I ordered bimini thought Overton's. Around 250 and they have 50 off 250 this week.
It may not lay back over the curved areas of the boat rails. but I'll just remove it and leave it on my dock when not using it. I think it will be up most the time as I'm not much of a direct sun person. I won't know how well a bimini would hold up at full speed, but I don't forsee 60+ for long periods very often either. Check them out - I ordered the 85-90" size. (wide)
#5
RFoster130
-
- Members
-
- 99 posts
Novice
- Year of DOO:1998
- Model of DOO:Speedster
- Engine in DOO:Twin 110hp Rotax (800)
Posted 25 February 2011 - 09:37 AM
Ron if you have the front straps and the rear support rails, you can leave it up at 50+. Without those 2 things though, I wouldnt try it.
#6
RFoster130
-
- Members
-
- 99 posts
Novice
- Year of DOO:1998
- Model of DOO:Speedster
- Engine in DOO:Twin 110hp Rotax (800)
Posted 25 February 2011 - 09:39 AM
I also think that will be way too wide for you.When I bought the universal fit bimiini, I think I went with the 67-72 and it fit perfect. With it being wider, you might get it to work by mounting it on the sides of the boat rather than the top rail.
#7
Ron K
-
- Members
-
- 16 posts
Novice
- Water:Fennessy Lake and Lake Michigan
- Year of DOO:2001
- Model of DOO:Speedster 160
- Engine in DOO:Mercury Mē Jet Drive 240 EFI
Posted 21 March 2011 - 05:13 PM
yikes - hope it fits. Still haven't picked up the boat yet. Our lake "just" thawed (totally) today, but snow expected this week, next weekend 30's maybe weekend after. I'm chomping. I hope it fits. = (
Else I dunno how overton's handles shipping on exchanges. I might have to pay to ship it back. = (
Else I dunno how overton's handles shipping on exchanges. I might have to pay to ship it back. = (
#8
RFoster130
-
- Members
-
- 99 posts
Novice
- Year of DOO:1998
- Model of DOO:Speedster
- Engine in DOO:Twin 110hp Rotax (800)
Posted 26 March 2011 - 06:10 PM
They fit a lot of other boats. you may be able to sell it locally on craigslist.
#9
speedster03
-
- Members
-
- 13 posts
Novice
- Year of DOO:2003
- Model of DOO:Speedster 160
- Engine in DOO:Mercury Mē Jet Drive 240 EFI
Posted 15 April 2011 - 07:56 PM
Do you have any pictures of the electronic trim tabs?
Post if you do...
Thanks
Post if you do...
Thanks
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
