I just bought a sbt rebuilt motor. Bolted on the carbs and exhaust. I want to install into boat but am not sure where to start. I know I have to prime the oil pump but do i have to put any other oil into the case or anything? Not sure where to go and dont want to blow up another motor by a dumb mistake. thanks so much! -Casey
![Photo](https://secure.gravatar.com/avatar/00a3f76ab87a48e763f2675a88ec9227?s=100&d=https%3A%2F%2Fseadoosportboats.com%2Fpublic%2Fstyle_images%2Fsdsbmaster%2Fprofile%2Fdefault_large.png)
787 rebuild help
Started by pnkrckchiro, Jun 23 2010 02:45 PM
3 replies to this topic
#1
Posted 23 June 2010 - 02:45 PM
#2
Posted 24 June 2010 - 12:01 PM
I would check with SBT, they should be able to provide some type of manual or how-to to go along with the motor they sold you. Keep us posted on what you find out.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
Posted 25 June 2010 - 05:16 AM
I`d bolt on as little as possible,making it easier to install. Don`t forget to align the engine and put back all shims[ if any] in original place.You can premix the first tank and do a test after you get it running,the shop manual will shows you how.Also contact SBT-I think they have a video for installation
#4
Posted 15 August 2010 - 09:52 AM
sbt has a step by step instructions on there forums
Attached Files
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users