25 replies to this topic

[Kevin Leclair]

Do you know if anybody has a wiring schematics for the Chalenger 2000 ???? I have the shop manual but that does not include the Schematics!!!

Thanks for the help....

Our manual here has the wiring diagram included at the back of it - http://seadoosportbo...20-shop-manual/

[johnny quattro]

Do you know if anybody has a wiring schematics for the Chalenger 2000 ???? I have the shop manual but that does not include the Schematics!!!

Thanks for the help....

Try this online microfiche view:
http://partsfinder.o...m/Seadoo_JB.asp
You will select which 2000 challenger 2000 is yours and all of the drawings, wiring and part #'s are provided.

[Dingus]

Is there a Replacement for a 2005 Challenger 180 in Stainless Steel ?

[ginper]

Does anyone know if these grates will fit a 2009 230 Wake?
852962T or 854810T1
Thanks

[kennypersad]

I installed the 11 tine stainless steek grate on my islandia, however, the front section fits perfect, but the rear section with the 2 screws does not fit flush to the bottom housing on the drive, it protrudes about 1/8 of an inch. Is this normal with the 854810T1 or does it suppose to fit flush. It seems I may have to sand the edges on that area to fit. Can Someone post a pic showing how the 11 tine fits on the Islandia.

Thanks,
Kenny

[biffdotorg]

Does anyone know if these grates will fit a 2009 230 Wake?
852962T or 854810T1
Thanks

These grates are for the Mercury powered and not the Rotax powered SeaDoos. You will want to hit up the SeaDoo parts catalog for options or a model specific forum for advice.

I believe the hydrosurge was only on the Mercury.

Good luck,