I bought a 10" polk db subwoofer and a kicker amp for the c180, im gonna put it by the passesnger side footwell like most have.
My question is how does this sound? has anyone stufed the area with batting? Also are there braces in there that will get in the way if i dont cut in the right place? (my old speedster had tons of foam and bracing in it)
Next what is the easiest way to run the power and ground to the back?
Lastly i have a 2009 with the jensen deck(which will be changed soon) does anyone know if it has rcas and a amp turn on wire?
Sub install questions
Started by brade07, May 14 2010 05:17 PM
5 replies to this topic
#1
Posted 14 May 2010 - 05:17 PM
#2
Posted 14 May 2010 - 05:20 PM
Take a look at this post, http://seadoosportbo...woofer-install/
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
Posted 14 May 2010 - 05:53 PM
I looked at that post, but it doesnt really say if there is an exact position you have the cut the hole in for the sub.
#4
Posted 14 May 2010 - 08:03 PM
I would say there is no "exact" position, this would really be up to the location of where you want it.
Need a shop or part manual for your boat or PWC? Join the SDSB Club here, http://seadoosportboats.com/join and download them here, http://seadoosportboats.com/manuals
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#5
Posted 14 May 2010 - 10:00 PM
ok just wanted to make sure i was gonan cut through any structural supports
#6
Posted 17 May 2010 - 09:12 AM
ok just wanted to make sure i was gonan cut through any structural supports
Remove the cup holder above the sub so you can see in there. There are some wires, but no supports to worry about.
KH
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users