wakeboard ballast
#1
Posted 04 March 2010 - 01:35 PM
#2
Posted 04 March 2010 - 03:49 PM
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#3
Posted 05 March 2010 - 02:20 PM
Do you have any pics of yours, I would like to see your setup? Also do you have any pics of the wake that you can share?
not yet. Haven't had a chance to get out. Question: what is the big foam piece behind the motor for? Is it supost to be attached to something? I would really like to put some ballast back there in the future but they would have to have a ballast pupppy pump connected to them. there is no way im climbing down there to fill and drain them.
#4
Posted 05 March 2010 - 02:28 PM
#5
Posted 05 March 2010 - 03:46 PM
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#6
Posted 08 March 2010 - 05:22 PM
#7
Posted 08 March 2010 - 05:54 PM
Its in the very back of the boat, directly behind the motor. very large piece of foam. you cant miss it if it is back there on your boat. If its not supost to be there its gone b\c i dont know where it came from. Its cream foam wrapped it black egg foam. Ill try to get a pic up.
Attached Files
#8
Posted 09 March 2010 - 01:24 AM
#9
Posted 09 March 2010 - 08:08 AM
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#10
Posted 09 March 2010 - 10:44 AM
#11
Posted 25 March 2010 - 10:36 AM
Nobody else has this piece? Its not attached to anything!
I think I figured it out! I took out the back seat coolers so i could have access to the sides of the boat. I put a 350lb sac on each side with the fill/empty spout coming out of the cup holders on the floor behind the driver and passenger seats. Then put everything back to normal except the cup holder. Ill try to post some pics later. really easy project for a better wake without taking away from seating or floor/storage room.
#12
Posted 25 March 2010 - 11:47 AM
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#14
Posted 28 March 2010 - 01:27 PM
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#15
Posted 17 May 2010 - 12:01 PM
- Fmehrer likes this
#16
Posted 17 May 2010 - 02:22 PM
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#17
Posted 02 June 2010 - 01:01 PM
here is a few pix
#18
Posted 02 June 2010 - 01:57 PM
Keep in mind if you have a large amount of pictures that you want to share you can upload them to our Gallery. I went ahead and uploaded these for you in our 'Watersports' section of the Gallery here, http://seadoosportbo.../9-watersports/.
Once they have been uploaded you can view them through this cool slideshow feature, http://seadoosportbo...slideshow&cat=9.
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
#19
Posted 17 July 2011 - 12:09 PM
I think I figured it out! I took out the back seat coolers so i could have access to the sides of the boat. I put a 350lb sac on each side with the fill/empty spout coming out of the cup holders on the floor behind the driver and passenger seats. Then put everything back to normal except the cup holder. Ill try to post some pics later. really easy project for a better wake without taking away from seating or floor/storage room.
I was looking at doing the same thing with my 2009 challenger 180 as I do not want to compromise my seating/floorspace. What are the dimensions on your side sacs? When you fill them they don't interfere with the tubing from the bilge pump or the tubing for the gas intake? I have stainless steel cup holders and they don't seem to come out to run the fill/empty spout through them. Any help you could offer would be greatly appreciated. I just bought a Ronix Koal wakesurf board and I can't wait to use it!
#20
Posted 18 July 2011 - 10:01 AM
I wakeboarded behind the boat once with this much weight. I didnt think the boat would pull me up and get on plane but it did. It was a great wake.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users