4 replies to this topic

[xrsrolla]

Has anyone tried the airhead bungee rope? Do you lie it or dislike it? http://www.overtons....e...1009&r=view

[Kevin Leclair]

That looks very exciting! I haven't tried it before but I can imagine it would really sling someone harder in the turns with the bungee effect!

[Kev077]

That looks very exciting! I haven't tried it before but I can imagine it would really sling someone harder in the turns with the bungee effect!

I have the airhead bungie rope. The first time I used it I believe I used it on too big of a tube. The resistance of the big tube with the bungie rope bent the ski pylon on my 2006 speedster. I swithced to a fixed rope for the big tube and have not had any more problems. It does work great with the smaller 1-2 rider tubes, but that was the only rope I had at the time and used it to pull a 4 person tube, with just on rider though. Hope this helps.

[keviseeb]

I have the airhead bungie rope. The first time I used it I believe I used it on too big of a tube. The resistance of the big tube with the bungie rope bent the ski pylon on my 2006 speedster. I swithced to a fixed rope for the big tube and have not had any more problems. It does work great with the smaller 1-2 rider tubes, but that was the only rope I had at the time and used it to pull a 4 person tube, with just on rider though. Hope this helps.

The good news is that the ski pylon on the 200 Speedster was changed to a thicker tube in 2007 and 2008. If you need a replacement for a 2006 or earlier make sure you get your dealer to give you the late model pylon!

Kevin Seeber
Kingsland Marine

[Kev077]

The good news is that the ski pylon on the 200 Speedster was changed to a thicker tube in 2007 and 2008. If you need a replacement for a 2006 or earlier make sure you get your dealer to give you the late model pylon!

Kevin Seeber
Kingsland Marine

Thats great news and thanks for the info Kev. I do see the model numbers for the pylon are different for the 2006, and 2007 model year. My question is will the new pylon fit in the old holder. Thanks again for the info.