So i was pulling a skier when i acidentally ran over the rope and it got sucked into the intake grate i was assuming it didnt go in deep but it wouldnt budge now i have no idea what to do i am gonna take it out of the water and see what i can do without having to take it to the dealer. If anyone can tell me from past experience how to take intake grate off and any advice i could use to get the rope out.
Help with rope caught in impeller
Started by Damian0804, Aug 12 2007 08:21 PM
4 replies to this topic
#1
Posted 12 August 2007 - 08:21 PM
#2
Posted 13 August 2007 - 07:58 AM
I had a similar problem with my speedster some time ago. We put her up on the trailer and with a very sharp knife about 8 inches long cut the rope off the impeller shaft and we were back in the water 20 minutes later. We did not remove the grate or otherwise.
Hope this helps,
Fialoe
Hope this helps,
Fialoe
#3
Posted 13 August 2007 - 11:23 AM
same here. did it like a month ago. we just put the boat up on the trailer and cut out the rope. no big deal
#4
Posted 13 August 2007 - 05:08 PM
Ok so i pulled it outta the water i had to take the intake grate off and i cut off all the rope that was tangled, then i pulled out the rest out of the jet nozzle put it back into the water and it ran perfectly.
#5
Posted 15 August 2007 - 08:33 AM
Just like that. And we didn't even charge you a call out fee!!!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users