2 replies to this topic

[delarosa74868]

I took my speedster out this weekend and noticed one enging was running at about 1000 RPM's more than the other. I just turned my hand a little and gave the other more throttle. anyone know how i can adjust the throttle? they both idle the same, it only changes when im at half throttle. I really havent noticed what they are at full throttle.

[fialoe]

It may be possible the accelerator cords on each throttle are reacting slightly differently. Have you tried tightening cables? Are both cables still attached etc? Also are they reacting this way at WOT? What is the service history of each engiune? ETC? ETC?

[tiggerman]

Cable adjustment is provided under the control lever assembly. Remove the 4 screws that attach this assembly to the boat, and lift straight up. Adjust so that there is about the same amount of slack in each cable, but not so tight as to increase idle speed. If they both idle at approximately the same speed, then cable adjustment should fix you up.