3 replies to this topic

[David Kortyna]

Trying to remove dash for a 2011 challenger 180 for adding a depth finder. Older challengers have screws on the dash but not the 2011 model. If anyone knows how I would appreciate it, I don't want to start guessing and brake something!

[Johnny O]

This is what I read in another forum:

 

Access to the dash electrics is made from the bow. On the two wrap around back rests in the bow, down the bottom, there is two screws either side. Unscrew these then the cushion will lift off. This will then give you access on both sides.

 

Good luck,

Johnny O

[David Kortyna]

I thought I saw that too, I just wanted to see if anybody had personal experience. Thanks for the quick response! I'll try next week and post the results.

[David Kortyna]

two screws one on front bottom and the other on the aft bottom of wrap around seat cushion. Cushion then slides up off of three hooks.