1 reply to this topic

[Burpy]

Both my Rotax engines are loose on the metal mounting plate. The Mounting plate is firmly attached to the hull. Any ideas on tightening the engines?

[tiggerman]

By mounting plate, do you mean the cradle under the engine? The engine mount bolts are visible at all 4 corners of the cradle.....If those are tight, the bolts that attach the engine to the cradle are loose-and under the cradle. You will need to figure out a way to reach them, or take everything loose. If you have to do this, you will also have to re-align the engine/driveshaft to the impeller on both sides (assuming that both engines are loose.).