Pardon the stupid question but while cleaning the boat I pulled up on a seat cushon and cannot get it back into place. Any ideas?
sportster 05 seat installation
Started by mudhen, Sep 10 2005 06:43 PM
2 replies to this topic
#1
Posted 10 September 2005 - 06:43 PM
#2
Posted 10 September 2005 - 09:11 PM
See if the plastic pins, rivets , nails or whatever u want to call them have stayed in the floor of boat . If so pull them out and reattach to seat base . line up with holes and push firmly down.Pardon the stupid question but while cleaning the boat I pulled up on a seat cushon and cannot get it back into place. Any ideas?
#3
Posted 11 September 2005 - 09:39 AM
Thanks for speedy reply. A light in my head went off about 2 am and I realized that the plugs in the floor would have to come out and then attached to the seat. Well, this morning all went well and the seat is not fitted to thew boat. Next time I'll sit on my hands, stop and think before pulling on things. Thanks again for the guidance.See if the plastic pins, rivets , nails or whatever u want to call them have stayed in the floor of boat . If so pull them out and reattach to seat base . line up with holes and push firmly down.Pardon the stupid question but while cleaning the boat I pulled up on a seat cushon and cannot get it back into place. Any ideas?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users