16 replies to this topic

[clyoung21]

Hey all, I have a new 2012 230 Wake with the touch screen navigation, however it came with no manual or information whatsoever for the navigation portion of the system.

I can not find any information on the type of map card to add, how to update the system with new map data etc. All Sea-Doo states online is *Maps not included.

Based on a video review BRP has online I assume it is a navionics SD Card that is inserted into back of unit, however i have no clue which type of navionics cards it accepts, and the unit allows an SD card to put in flipped both ways. I currently have a Navionics Gold SD Card inserted (tried both directions) and I get nothing! Anyone have this model or any experience with this issue?

[Kevin Leclair]

Sorry for the delayed response but here is some additional information I was able to gather for the Medallion Viper system featured in the MY2012 boats.

1. The Medallion Chart Plotter Application supports the following map Navionics Map Databases:

• For Boaters who boat primarily on Lakes we recommend Hot Maps Lakes Premium Charts.
• For Boaters who Boat primarily on Intercoastal waters we recommend Marine Gold Charts.

The Navionics web site contains a more detailed compatibility guide at: http://www.navionics...tyGuide_v20.pdf

2. The card may only be inserted one way as there are tabs in the card reader and slots in the SD Card designed to ensure that the card is inserted correctly. If the display is oriented as shown below the SD card is inserted with the contacts facing up and the label facing down. When inserting a card you will hear a click as it locks into place.

 Screen Shot 2011-12-21 at 11.10.00 AM.png   113.08K   32 downloads

The SD Card Reader is spring loaded. So to release the inserted SD card just push it in until you hear a click and then let go of the card and the card will release and pop out far enough that you can grab it.

[BRPSeaDoo]

Please let us know if you have any other questions! Thanks!

[clyoung21]

Thank you I appreciate the help! Unfortunately I have followed these directions and have the proper card but the system still takes no action or displays any new information when the card is inserted. I assume I must have a hardware issue requiring return to dealer but if not, any advice on getting the system to recognize and load the card data would be greatly appreciated!

[Kevin Leclair]

I would recommend taking it to the dealer like you suggested, keep us posted of their findings.

[mstokes]

I have the same exact problem, did you have any luck solving this issue.

[BD230WAKE]

Same issue here. Dealer did nothing to help nor had any info from sea doo direct. Horrible taste in my mouth after this purchase... Many issues with my boat...

[trailblazor]

This is from the BRP tech

Here are the steps to follow:

1) With power off, insert the card with the contacts facing up. (The display do not download the maps at once. It needs access to the card while in the NAV mode so the card has to stay inserted all the time.)
2) Power up the display and press NAV.

Notes: If the NAV is accessed 1st and then the card inserted under power, the display will not load the new maps. The display loads the new maps the 1st time NAV is press. Even tough not recommended, the card could also be inserted under power before NAV mode has been selected and the display would still load the maps.

Can we make sure they have the right sw version?
-APPS
-SETUP
- Scroll down to ABOUT SMARTOUCH
- Info display should show : Firmware v01351-41

Let me know if you have any other questions.

[mstokes]

I just heard from my dealer. He said that i put the card in upside down, and that is why it will not read the
maps. Has anyone else ever heard of this? When they do not publish any information about the unit,
how are you to know which way it goes, and I thought that it would not go but one way?
Has anyone else ever heard of this.


Thanks,

[mstokes]

Do you have to have a new map card for the navigation system to zoom in past 75 miles?
That is all it will zoom in as it came from the factory.

[trailblazor]

How old is your chip mstokes?

Also look and see that you have the latest firmware on the medallion.

-APPS
-SETUP
- Scroll down to ABOUT SMARTOUCH
- Info display should show : Firmware v01351-41

Edited to show directions on how to check firmware

[mstokes]

The chip is brand new, and also updated. I will check the firmware when I get the boat back from dealer.
I just don't understand even if the chip was put in backwards, how does that mess up the complete dash unit.

[trailblazor]

Alright keep us updated, also you should be able to zoom in past 75 miles, but will loose the resolution of the land.

I just don't understand even if the chip was put in backwards, how does that mess up the complete dash unit.

Not sure I understand what you mean by this, sorry can you elaborate please.

Thanks

[mstokes]

My dealer is telling my that I put the chip in upside down, and that is why it does not work.
The problem is it did not work to start with, it has never zoomed in past 75 miles.
I sent several emails to seadoo and dealer trying to get help in how to insert chip,
and I got no help from either so I had no choice but to try on my own.
Besides putting a chip in upside down should not destroy the unit.

[trailblazor]

mstokes

pm sent

thanks

[jagsiva]

I got the Hot Maps, and Marine Gold Charts.

I installed the card as per instructions above, i.e. take plastic cover off, and insert card with pins facing up. The card slides in and is spring loaded, so one push to load, and another to eject.

Both cards worked fine. I installed the cards with everything off.

Couple of comments....first, getting behind the dash to install the card is a pain, especially with the all the cables and unfinished fibreglass. Secondly, the maps do not load into the system, you need to have the card in for the system to use the maps. I believe this is true of all navionics charts.

Otherwise, everything is as expected.

[Wake_230_WA]

Hi,
Easy install of the Navionics Marine Charts Gold on my 2012 Sea-doo Wake 230, 510 Hp
Turn offtouch screen system shutdown,
Gained access to the back side of the Medallion Nav unit by removing the snap backing on the oppisite side of the console(Bow, Driver seat-rider back seat lift up).
Remove upper back left side rubber cover on the nav unit.
Insert Scan Disk Pins first and pins up, Version side down.
Push until it clicks and stays, cover with rubber plug.
Turn on unit and zoom in for local map display and check of nav maps working.