Posted 21 October 2010 - 12:14 PM
also what are common problems to cause low compression
2 cylinders are 150 and one is 130 right now.
Posted 22 October 2010 - 02:08 AM
is this possibly stuck rings?
any other suggestions.
boat runs fins and reachs 48mph though.
so any ideas what i should do?
Posted 22 October 2010 - 07:36 AM
Posted 24 October 2010 - 03:18 AM
They wont tell me what a rebuild cost except it starts at 900 to find out.
Then who knows.
Are stuck rings common and could this be the cause?
Do you have another dealer that is close by that could give you a second opinion? The two cylinders running at 150 seem okay to me but the one running at 130 might be a little low. I am not sure if this would call for an entire rebuild which is why a second opinion might be a good idea.
Posted 27 August 2011 - 10:16 PM
I personally would try to research more, and get a few more opinions. 130 vs 150 is quite a substantial drop so it definitely shows ring issues with that one cylinder. If all 3 were in the 130 range I'd say you are good to go, but with just one that low it sounds like there is/was an issue at some point.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users