tower install questions
Posted 17 July 2008 - 07:22 AM
If anyone has any tips on installing a tower on a speedster 150 post up, I already read the how to for the challenger so I think I have a pretty good handle on it, but any tips would be appreciated.
Posted 17 July 2008 - 08:38 AM
What tower are you going with?
Want to spread the word about SeaDooSportBoats.com and sport some official SDSB Gear? See what we have to offer here, http://seadoosportboats.com/gear
Posted 17 July 2008 - 11:08 AM
Posted 18 July 2008 - 12:29 PM
I got a liquid audio sounds from ebay. I'm not sure if there is enough room to get any reinforcement in the hull without cutting some holes, hopefully I can get away with not cutting many if any holes.
You are ok at the rear mounts, there is enough room to get the reinforcing plate in and mount the tower without cutting holes....the front is a whole different story. Depending on the spread, i.e. the distance between the front and rear mounts, you may beable to drill some holes through the 2 storage areas to get to the mounts but it will be tough! Sorry it has to be that way, we have been suggesting reinforcement in all boats but unfortunately there is no way for Sea Doo to know the spread distance so consequently they don't know where to place the reinforcing.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users